VEHICLE INSPECTION EQUIPMENT
Brake Tester
BEISSBARTH - Car Brake Testers
Key Features
Under unfavorable conditions, the road surface adhesion of a wheel is governed by the technical condition of the suspension elements (suspension system, wheel bearings, tires and shock absorbers).
The SA 640 measures the relative road surface adhesion of a wheel on the basis of the internationally recognized EUSAMA principle.
The results of the full chassis test provide an overall assessment of the road safety of the vehicle.
Measurement system: Bending bar with strain gauge
Suspension Tester
BEISSBARTH - Suspension tester SAT 695 | THETA | with noise detection
Key Features
- Through the SAT 695 it is possible to quickly and unambiguously check and assess axle damping, because this is tester determines axle damping on a physical basis.
- Operation of the SAT 695 is based on the resonance method and it analyses at the resonant frequency the amount of energy present in the vibrating system (wheels, axle and body).
- Through a further physical assessment the dimension-less Lehr’s damping factoralso known as damping ratio “D” can be determined.
- This measurement principle is considered as being highly accurate and this has been confirmed already several times through comprehensive surveys and comparative tests.
Suspension Tester SAT 690 | THETA
Key Features
- Through the SAT 690 it is possible to quickly and unambiguously check and assess axle damping, because this is tester determines axle damping on a physical basis.
- Operation of the SAT 690 is based on the resonance method and it analyses at the resonant frequency the amount of energy present in the vibrating system (wheels, axle and body).
- Through a further physical assessment the dimension-less Lehr’s damping factoralso known as damping ratio “D” can be determined.
- This measurement principle is considered as being highly accurate and this has been confirmed already several times through comprehensive surveys and comparative tests.
Sideslip Tester
BEISSBARTH - Sideslip Tester MSS 8400
Key Features
To quickly measure toe-in or toe-out on two-tracks trucks with maximum test load of 8000kg. Compatible with both old (MB 8xxx) and new (BD 5xxx to BD 8xxx) generation brake tester
BEISSBARTH - Sideslip Tester ST 600
Key Features
Special accessory for series BD 4xxx brake tester | only to be used for checking toe-in or toe-out on double-track vehicles
- The ST 600 is a laterally slidable steel plate.
- A precision potentiometer or resistance strain gauge sensor measures the lateral deflection of the side slip tester
| Weight | 30 kg |
|---|---|
| Protection class | IP 54 |
| Length | 750 mm |
| Height | 47 mm |
| Operating temperature | -10 – 50 °C |
| Width | 440 mm |
| Max. axle load testable | 2000 kg |
| Measuring range | +/- 20 mm/m |
| Storage temperature | -10 – 50 °C |
| Relative humidity max. | < 85 % |
| Max. drive-over load | 4000 kg |
Get free estimates for vehicle inspection equipment
Tell us what you need by completing this easy form