VEHICLE HOISTS AND CAR LIFTS
2 Posts Lifts
BISHAMON - OSA-NSA Series
Key Features
- Lifting Capacity: 3,500 kg
- Vertical Travel: 1,800 mm
- Flow Control Valve -It ensures smooth lowering when lifting any vehicles. It also makes it light to control the operation lever.
- Safety Hook – Safety hook features direct & positive engagement in Main Column for maximum safety against chain breakage.
- Robust Carriage Design – Solid steel bearing. Lubricated and sealed for extended service life.
- Shut Off Valve – An automatic shut off valve is equipped for maximum protection against hydraulic failures.
- Automatic Arm Restraint With Dual Lever – Arms restrain automatically when lifting up for maximum safety. Dual lever allows you to adjust arms individually for easy and smooth liftings.
- Body Contact Pads – Various kinds of Pads are available.
BISHAMON - SPA Series
Key Features
- Lifting Capacity: 4,000 kg
- Vertical Travel: 1,800 mm
- Flow Control Valve – It ensures smooth lowering when lifting any vehicles. It also makes it light to control the operation lever.
- Single Lever Control – A single lever operates safely for both hook releasing and lowering.
- Automatic Arm Restraint With Dual Lever – Arms restrain automatically when lifting up for maximum safety. Dual lever allows you to adjust arms individually for easy and smooth liftings.
- Hydraulic Cylinder & Shut Off Valve – Dual hydraulic cylinder system has automatic shut off valve to protect against hydraulic failure.
- Body Contact Pads – Various kinds of Pads are available.
SPACE - SDE Series
Key Features
- Lifting Height: 2 metres.
- Steel high resistance rolled screws, to provide long life.
- Main nut made of bronze (no plastic) with high resistance to wear, for greater safety.
- Automatic and permanent nut lubrication system to guarantee efficient lubrication during lifting and descent.
- The carriage driven by 10 low friction slides on the post external part assure equilibrated and steady lifting also in case of asymmetric loading and prevent transmission of flexion to the spindles and the nuts, granting long life.
- Automatic arm locking during lifting and automatic unlocking when the arm reaches the floor-self-locking conical design.
SPACE - SDH Series
Key Features
- Lifting Capacity: 5,500 kg or 7,000 kg
- Vertical Travel: 2,040 mm or 2060 mm
- Mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position.
- Synchronization cables grant the levelling of the two carriages.
- Each column features a maintenance-free lifting cylinder.
4 Posts Lifts
BISHAMON - FP Series
Key Features
- Lifting Capacity: 3,500 kg or 4,000 kg
- Centre Scissor Capacity: 1,500 kg
- Vertical Travel: 1,695 mm
- Safety Device – Against chain breakage.
- Oil Flow Cut Off Valve – Against hydraulic breakage.
- Safety Device – Against wire breakage.
- Upper Lift For Wheel – Free
- Jacking Beam (OPTION)
SPACE - Electro-Hydraulic Mobile Column Lifts - SM Series
Key Features
- Lifting Capacity per Column: 7,500 kg
- Electro-hydraulic operating lifts.
- Equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture.
- Self-controlled lowering speed.
- Mechanical safety latch with automatic engagement and hydraulic release ensuring maximum safety when lift is in parking position.
- Rollers for carriage movement fitted on self-lubricating bearings requiring no maintenance
- Warning light when the lift is in parking position.
- Modular electrical systems enable alterations to be made to configuration (e.g. passing4 to 6 to 8 columns or creating two set s of4 columns by splitting a set of 8 columns).
SPACE - 4 Posts Lifts Electro-Hydraulic (Model SQ 402)
Key Features
- Lifting Capacity: 3,500 kg ~ 5,700 kg
- Vertical Travel: 1,950 mm
- The hydraulic cylinder is located inside the fixed platform and is thus perfectly protected
- High-resistant, galvanised and pre-stretched metal cables
- Large-diameter pulleys with self-lubricating and maintenance-free bushes
- Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables
- Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking
Compact Scissor Lift
BISHAMON - Tortoise G
Key Features
- Lifting Capacity: 3,000 kg
- Vertical Travel: 1,800 mm
- Super Low Profile – Minimum Height is only 105 mm which makes drive on/off operation easy. Lift can be installed above floor or recessed into a shallow pit.
- Smooth Controlled Lowering – Bishamon’s patented hydraulic synchro cylinder ensures reliable lift synchronization.
- Hydraulic Unit Is Separated From The Lift.
Multi and Mucross Lifts
BISHAMON - Multi Alignment Series
Key Features
- Lifting Capacity: 4,000 kg
- Vertical Travel: 1,650 mm
- Swing Board Supporter – Swing board supporter equipped in upper lift can reach jacking point of SUV, VAN and so on.
- Applicable Wheelbase At Max. – 3,300mm (MUS40HU) and 3,800mm (MUS40HUL)
- Alignment Measuring Range – 2,000 ~ 3,100mm
Motorcycle Hoist
SPACE - Motorcycle Hoists (Model SB 1394, 1394P and SB 1396 E)
Key Features
SB1394 – SB1394P / kg 400
Pantograph lift with foot-operated hydraulic pump (SB1394) or with air-hydraulic pump (SB1394P). Lifting height of 800mm. The particular design of the run-up ramp allows easy rear wheel removal.
SB1396P – SB1396E / kg 600
Scissors lift with air-hydraulic pump (SB1396P) or with electro-hydraulic control box (SB1396E). Great lifting height of 1000 mm. The rear centre part of the platform can be easily removed to facilitate rear wheel removal.
Commercial Vehicle Hoist
OMER - VEGA Series
Key Features
- Lifting Capacities: 12,000 kg to 52,000 kg, depending on model number.
- Vertical Travel: 1,850 mm.
- All lifts are available in the Above Ground and Flush Mount versions.
- Mechanical safety locks.
- No obstructions under the vehicle.
- Quick installation.
- No anchoring on the floor and easy relocation (for the standard versions)
OMER - KAR Series
Key Features
- Lifting Capacity: 25,000 kg to 35,000 kg, depending on model number.
- Vertical Travel: 1,790 mm
- Platform length: from 7.000 mm up to 15.000 mm
- Platform Width: 930 mm
- Maximum height: 2.100 mm
- Electronic balance system with automatic leveling.
- The runway has been designed to be used with the lifting traverse T5 and T7 with upper sliding.
Get free estimates for vehicle hoists / car lifts
Tell us what you need by completing this easy form