HYDRAULIC LIFTING EQUIPMENT
Trolley Jacks - Manual
COMPAC - Extremely Low Chassis Jack 2 Ton (Model 2T-77)
Key Features
- Capacity: 2 Tons
- Vertical Travel: 480 mm
- Weight: 42 kg
- Extremely low and long reach chassis.
- Ultra low entry height only 77 mm.
- Long reach chassis improves acces to lifting points deep under vehicles.
- Quick approach foot pedal.
- Ergonomically designed handle for operator comfort.
- Max. height 480 mm.
COMPAC - 3 Ton Jack (Model 3T-C)
Key Features
- Capacity: 3 Ton
- Vertical Travel: 500 mm
- Weight: 43 kg
- Long reach chassis improves acces to lifting points deep under most vehicles.
- Ergonomically designed handle for operator comfort.
- Lift and turn lowering system prevents unintentional lowering.
- Quick approach foot pedal.
- Built-in safety lowering control valve for safe lowering even under maximum load.
- Built-in pressure relief valve prevents overloading.
- Heavy duty fully welded structure in high quality steel.
- Max. height 500 mm.
- Noise reducing nylon wheels.
Trolley Jacks - Air Operated
COMPAC - Air Hydraulic Jacks - Trucks And Buses (Model A5816-C)
Key Features
- Capacity: 58 Ton
- Number of Stages: 3 (16 – 58 Ton)
- Weight: 57 kg
- Min. height: 120 mm
- Max. height: 255 mm
- Maximum height 455 mm by utilization of the 3 extension.
- Standard extensions: 10, 70 and 120 mm.
- Ideal for low access busses.
- Short design for easy manoeuvrability.
- Long handle for better reach.
COMPAC - High Capacity Jack (Model 10T-CK)
Key Features
- Capacity: 10 Ton
- Weight: 106 kg
- Min. height: 165 mm
- Max. height: 580 mm
- Ergonomically designed handle for operator comfort.
- Built-in safety lowering control valve for safe lowering even under maximum load.
- Larger diameter swivel wheels for easy handling.
OLMEC - 2 Stage Hydraulic Jack (Model J214)
Key Features
- Capacity: 1º stage > 30,ooo kg
- Capacity: 2º stage > 15,000 kg
- Weight: 50 kg
- An exclusive design implemented in a range of 19 compact, functional models is the best response to today’s constant progress in vehicle construction.
- The built-in safety valves prevent accidental overloads and prevent the load from dropping in the event of a pneumatic pressure failure.
OLMEC - 4 Stage Hydraulic Jack (Model J650)
Key Features
- Capacity: 1º stage > 76,500 kg
- Capacity: 2º stage > 45,000 kg
- Capacity: 3º stage > 27,500 kg
- Capacity: 4º stage > 14,500 kg
- Weight: 105 kg
- An exclusive design implemented in a range of 19 compact, functional models is the best response to today’s constant progress in vehicle construction.
- The built-in safety valves prevent accidental overloads and prevent the load from dropping in the event of a pneumatic pressure failure.
Transmission Jacks
COMPAC - Transmission Jacks (Model TJ-1000)
Key Features
- Capacity: 1000 kg
- Weight: 38 kg
- Wide wheelbase for stability during lifting and maneuvering of heavy loads.
- Spring loaded lowering system with dead man control.
- Large swivel wheels for easy maneuverability.
- Hard chrome piston.
- Ideal for handling and supporting exhaust systems, fuel tanks, etc.
- Reversible transmission adaptor with saddle and rubber pad.
- Height up to 2000 mm.
COMPAC - Telescopic Transmission Jack - Cars, Vans and 4WD (Model TJ-T1300)
Key Features
- Capacity: 1300 kg
- Weight: 65 kg
- Two stage cylinder for extra low minimum height and extra long stroke.
- Capacity 1300 kg. (1st stage) and 500 kg (2nd stage).
- Minimum height 1000 mm.
- Height up to 2010 mm.
- Ideal for demounting and mounting of engine/transmission.
- Wide wheelbase for stability during lifting and maneuvering of heavy loads.
- Spring loaded lowering system with dead man control.
- Two speed pump unit for fast approach of the piston to working area.
- Large swivel wheels for easy maneuverability.
- Reversible transmission adaptor with saddle and rubber pad.
- Ideal for handling and supporting exhaust systems, fuel tanks, etc.
COMPAC - Workshop Cranes - Cars (Model CC 10)
Key Features
- Capacity: up to 1.000 kg
- Long reach arm 1435 mm
- 88 mm low legs enable easy access under low vehicles.
- The extra long reach of the lifting arm enables easy lifting of engines on modern cars.
- Swivel pump handle position enables easy operation by just one mechanic.
- Spring loaded lowering system with dead man control.
- Foldable. Takes up limited space when not in use. (36 x 42 cm).
Hydraulic Presses
COMPAC - Hand Operated Workshop Presses (Model HP 40)
Key Features
- Hand operated workshop presses.
- Very long stroke of 300 mm.
- Foot operated air approach feature.
- Fast and safe adjustment of the press table height, using a braked winch.
- Moveable cylinder.
- Hard chrome piston.
- Air operated return of piston.
- Air connection fitted with water separator.
- Two V-blocks.
COMPAC - Wheel Dolly - Trucks and Buses (Model WD 500)
Key Features
- Capacity: 500 kg
- Foot operated lifting even with maximum load.
- Ideal for lifting heavy twin wheels on trucks and buses.
- Sliding lifing arms with rollers with ball bearings.
- Enables handling of wheels with diameter from Ø 260 mm-1320 mm.
- Max. lifting height 730 mm.
- Unit Weight:101 kg
Get free estimates for hydraulic lifting equipment
Tell us what you need by completing this easy form